煤田地质与勘探

2017, v.45;No.261(03) 170-174

[打印本页] [关闭]
本期目录(Current Issue) | 过刊浏览(Archive) | 高级检索(Advanced Search)

新疆某矿区1200m深孔施工关键技术
Key technology of drilling the borehole of 1200m deep in a coal mine in Xinjiang

秦品光
QIN Pinguang

摘要(Abstract):

深孔钻探对目前深部找矿有重要意义。针对新疆某矿区含煤地层的特殊地质条件,选择胎体硬度HRC25~HRC36金刚石齿轮钻头及金刚石梯齿钻头,适宜的钻进参数,使用植物胶无固相泥浆及低固相泥浆进行钻孔护壁等措施,保证了1 200 m深孔的绳索取心金刚石钻进,并取得很好的实际施工经验。同时,重视卡簧的测量选取及安装,加强相关设备的日常安全管理工作,防止因管理原因而引发的孔内事故发生。
Deep hole drilling is of great significance for deep prospecting. According to the special geological conditions of coal measures strata in a mining area of Xinjiang, roller diamond bit with the matrix of hardness HRC25~HRC36, diamond bit, suitable drilling parameters were chosen, solid phase-free gelatin mud and mud with low solid phase were used to protect borehole, 1 200 m deep hole drilling with wire line coring was ensured, good practical drilling experience was obtained. At the same time, attention was paid to selection and installation of core-catcher spring, the daily safety management of drilling machine and tools was enhanced to prevent downhole troubles induced by improper management.

关键词(KeyWords): 绳索取心;1 200 m深孔;钻进参数;冲洗液;技术套管
wire-line core drilling;1 200 m deep-hole;drilling parameters;drilling fluid;intermediate casing

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 秦品光
QIN Pinguang

参考文献(References):

文章评论(Comment):

序号(No.) 时间(Time) 反馈人(User) 邮箱(Email) 标题(Title) 内容(Content)
反馈人(User) 邮箱地址(Email)
反馈标题(Title)
反馈内容(Content)
扩展功能
本文信息
服务与反馈
本文关键词相关文章
本文作者相关文章
中国知网
分享