董萌萌
DONG Mengmeng

• 1:中煤科工集团西安研究院有限公司

摘要(Abstract)：

针对常规外平钻杆在施工大直径定向长钻孔易发生断裂、弯曲黏扣等问题,分析其失效原因,优选了钻杆材料,研制出Ф73mm高韧性高强度钻杆(High Toughness and High Strength Drilling Pipe,HHDP)。通过性能检测和现场试验:钻杆整体抗扭能力达到20kN·m,抗弯能力达到2°/3 m,施工大直径定向长钻孔时,千米扩孔进尺钻具事故率约0.26次/km,约为其他同规格钻杆的18%。
According to the failure such as fracture, bending and thread gluing while drilling large diameter and directional long borehole using conventional drill rod, the paper designed a new drill rod named Ф73mm high toughness and high strength drilling pipe(HHDP) by analyzing the failure reason, optimizing joint structure and selecting materials. Performance testing and field testing results show that HHDP has antitorque capacity of 20kN·m and flexural capacity of 2°/3 m, its accident rate is about 0.26 time/km while drilling large diameter and directional borehole, about 18% of the other drilling pipe under same drilling condition.

关键词(KeyWords)： 高韧性高强度钻杆;接头设计;大直径钻孔;定向长钻孔;寺河矿
HHDP;joint design;large diameter borehole;directional long borehole;Sihe coalmine

Abstract:

Keywords:

基金项目(Foundation): 中煤科工集团西安研究院有限公司技术创新基金项目(2013XAYCX014)~~

作者(Author): 董萌萌
DONG Mengmeng

参考文献(References)：

• [1]孙荣军,魏刚,吴璋,等.顶板近水平长钻孔替代闭式高抽巷进行瓦斯抽放的试验研究[J].煤田地质与勘探,2005,33(5):19–22.SUN Rongjun,WEI Gang,WU Zhang,et al.Experimental research on using approximate horizontal long-hole instead of closed high extracted roadway to drain gas[J].Coal Geology&Exploration,2005,33(5):19–22.
• [2]孙荣军.国产随钻测量定向钻进系统在汝箕沟煤矿的应用[J].煤田地质与勘探,2011,39(4):77–80.SUN Rongjun.Application of home MWD directional drilling system in Ningxia Rujigou mine[J].Coal Geology&Exploration,2011,39(4):77–80.
• [3]李泉新,石智军,史海岐.煤矿井下定向钻进工艺技术的应用[J].煤田地质与勘探,2014,42(2):85–88.LI Quanxin,SHI Zhijun,SHI Haiqi.The application of directional drilling technology in coal mine[J].Coal Geology&Exploration,2014,42(2):85–88.
• [4]许超,石智军.煤矿井下定向钻进钻孔事故的预防及处理[J].煤田地质与勘探,2014,42(3):100–104.XU Chao,SHI Zhijun.Prevention and treatment of drilling accident in underground coal mine[J].Coal Geology&Exploration,2014,42(3):100–104.
• [5]赵旭生,孙东玲.定向长钻孔综合抽放瓦斯方法[J].煤炭科学技术,2001,29(3):13–15.ZHAO Xusheng,SUN Dongling.Comprehensive drainage gas method by directional long hole[J].Coal Science and Technology,2001,29(3):13–15.
• [6]吴建亭.大直径长距离高位钻孔参数优化与实施[J].煤炭科学技术,2010,38(8):63–65.WU Jianting.Optmization and implementation on large diameter and long distance high level borehole parameters[J].Coal Science and Technology,2010,38(8):63–65.
• [7]张海权,王惠风,王向东.大直径高位钻孔代替高抽巷抽采瓦斯的研究[J].煤炭科学技术,2012,40(6):51–53.ZHANG Haiquan,WANG Huifeng,WANG Xiangdong.Study on gas drainage with large diameter high level borehole to replace high level gas drainage gateway[J].Coal Science and Technology,2012,40(6):51–53.
• [8]毛信孚,傅莉,刘申城,等.地质钻杆的摩擦焊接和热处理[J].航空制造技术,2007(5):93–95.MAO Xinfu,FU Li,LIU Shencheng,et al.Friction welding and heat treatment for geological drill rod[J].Aeronautical Manufacturing Technology,2007(5):93–95.
• [9]朱海,郑海洋,郭艳玲.热处理工艺对摩擦焊接钻杆力学性能的影响[J].焊接学报,2008,29(12):93–96.ZHU Hai,ZHENG Haiyang,GUO Yanling.Effects of heat treatment technology on mechanical properties of friction welding drill rod[J].Journal of China Coal Society,2008,29(12):93–96.
• [10]张华佳,李娜,范炜,等.焊后热处理对摩擦焊钻杆性能的影响[J].焊管,2016,39(2):39–43.ZHANG Huajia,LI Na,FAN Wei,et al.Effect of the post-weld heat treatment on friction welding drill pipe properties[J].Welded Pipe and Tube,2016,39(2):39–43.

文章评论(Comment)：